Things you must know about fiber optic testing!

Today serving as the backbone of networks in almost every college, university, institutions and biggest MNCs, fiber optics has revolutionized the telecommunication industry like never before. Made out of transparent delicate fibers, optic fiber is the core ingredient of present day communication networks.
Serving fast and reliable data communication regardless of the distance involved, this technology has replaced all the conventional Medias of communication.

fiber optic testing is a crucial aspects of this technology. The main purpose of testing is to evaluate the performance of optical fibers and to check all the quality standards. It is used to check the quality of components of fiber cable and its system and to detect any potential fault. The components tested include connectors, light source or LED, detectors, receiver and splices, etc. This is used to confirm the specifications related to performance and quality.

There is special equipment that is used for testing purpose depending on the type of components being checked. Before performing the testing, keep in mind, the following points.

Make sure that you have the right fiber optic testing equipment such as:

• Cable trace or fault locator
• Optical fiber kit and power meter
• Coupling adapters
• Optical loss testing set (OLTS)
• Alcohol for cleaning
• Cleaning wipes
Make sure that you have proper knowledge of how to perform the testing. You should know how to use each and every testing tool. Read the instructions in the manual carefully to have a fair idea of how to go about testing the optical fiber cables. Before beginning the testing, make sure that all of the tools are working fine and properly. Unless you are fully aware and well equipped with the know-hows, it is best to take help of a professional fiber optic testing company.

One should have a proper understanding of the network layout under testing and inspection. If the person conducting the testing is well aware of the design, structure and layout of the network, fault finding and troubleshooting would be much easier. The testing phase is carried out alongside inspection also which is used to ensure there is no loss of light in the fiber optic media. Primarily there are two reasons behind the loss in signal, namely; damage and contamination.

Contamination: This happens on the ferrule (connector used for connecting fiber cable). It can happen because of simply touching the cable. Other reasons are dust particles, oil or any other small-charged particles that gets stick to the ferrule.

Damage: cables get damaged due to crack, scratches, pits or chips, etc. It can also happen due to poor coupling between cables. By now you must have known the important aspects of testing fiber optics and the associated requirements. For more details just go through my profile link:https://plus.google.com/u/0/112981337829189413685

Steps to clean fiber optic cable!

In order to have quality connections in a fiber optic system there is need of regular fiber optic cleaning. This is because if any dust particles, oil or lint gets accumulated in the cable it would degrade the optic signal. Apart from this these particles also cause few other problems like misalignment between the core cables, instability in the system and scratching the glass surface. Consequently this is the reason why it’s essential to clean fiber optic cable.

However, in order to clean the cables various fiber optic cleaning products are available in the market. These are categorized in 4 types:

• Abrasive cleaning
• Non-abrasive cleaning
• Dry cleaning
• Wet cleaning

Though before applying any of the above mentioned cleaning method, there are few steps that are must to follow:

• Before starting with the cleaning procedure, one must make sure that the cable is disconnected.
• Safety glasses should be worn
• Before cleaning, inspection is must to be done
• While cleaning, end face of the cable should never be touched
• Once the wet cleaning process is completed, dry cleaning method should be instant next step of cleaning procedure.
• Cleaning material also comprise of the use of alcohol, which is a flammable and should be avoided when there are any open sparks around
• Don’t leave alcohol on the end face of the cable as it would damage the whole cable when connected back into the system.

Now, once you are familiarized with the dos and don’ts of cleaning process here is step by step procedure of cleaning fiber optic cable:

• First and foremost step before cleaning is to make sure that the fiber optic cable is unplugged from the electronic system.
• Then hold the end of the cable and spray it with canned air. It is used to blow the dirty air particles, which are stored on the fiber optic cable.
• After using the spray, use lint free swab to further carry the process of cleaning. Hold the end of the cable, insert it into the swab tip and rotate the swab.
• Then use a piece of lens paper, fold it in half, apply 1 tsp. of isopropyl alcohol over it, wrap it over the cable and move it along the entire cable to remove the dust and dirt.
• Last but not the least, once the whole cleaning process is completed plug back the cable into the device but do make sure that you do not tough the cables end, while plugging.
Moreover,fiber optic has a good products like fiber optic cleaning so if you want to get more details about the Fiber optic testing & cleaning products so just subscribe to my link https://plus.google.com/u/0/112981337829189413685

Fiber Optic: Need for cleaning and cleaning methods

21st century is has witnessed profound changes in the information technology introduced diversely around the globe. There has been an incomparable improvement in the ways and devices used for fast communications. An important concept that has revolutionized the ways of communication is the concept of optical fiber.

Although, fiber optic technology sounds like twenty first centaury’s technology, many of us are unknown to it. The principal idea (use of light for communication) that functions behind this miraculous technology was original given, in the year 1790, by Claude Chappe, a French inventor. Later, in the year 1840, two scientists Daniel Colladon and Jacques Babinet, tried the same principle in an experiment “guiding a light from reflection”. From that time, the development in the area of fiber optic technology is consistent.

Concept:

Optical fiber is a flexible and thin wire of glass or plastic which works as a waveguide, or “light pipe to transmit light signals from one end of the fiber to another. As mentioned before, this communication media use the concept of light for communication which is a major advantage of regular or conventional wired media because light accelerates at much faster rate than electric current and provide greater bandwidth, thus results in faster communication (regardless the distance between two locations). Need for cleaning:

Less prone to any type of interference which results in prevention of data loss, there is an important concept that requires extra carefulness to be taken is cleaning of fiber optic. In general, optical fiber connectors require frequent connection and disconnection for transmissions and these repeated actions leave trash in the device. The most obvious effect of these materials (Dust, oils from hands, and other contamination) is data loss and decrease in their ability to transmit signal at fast rate. Even one micrometer of such dust particles can signal disorder and huge data loss. Therefore, optical fibers need to tested and cleaned after regular intervals.

Methods of ferrule cleaning: Mentioned below are different types of approaches used to clean optical cable:

• Compressed gas cleaning: Also known as canned air or compressed air, this approach of cleaning blows the dust particles out from the ferrule of the cable connector.
• Air Free wipes and solvents: In this method, dust particles are removed using special fiber optic cleaning products like cloth, lens paper, and solvent with a solvent, typically IPA (isopropyl alcohol).
• Swabs: Swabs are specifically designed head fit into the connector face. They are free of fibers, and adhesives; will leave no residue after cleaning. One important thing about these cleaning products is that they work well as solvent applicator.

Contact Us if you want to know more information about the fiber optic products.

Types of testing performed through fiber optic testing equipment!

Definitely we can find fiber cables and wires in most of the electronic devices. However, in order to have proper functioning of these cables fiber optic testing is needed to be performed.

Usually three types of testing called visual inspection, loss testing, and network testing are performed with the help of fiber optic testing equipment that comprise of source and power meter, fiber tracer, cleaning material, optical time domain reflector and more.

Now, let’s have a glance over the 3 types of testing performed through fiber testing equipment’s:

Visual testing-This type of testing is performed to diagnose the problems of breaking, bending or cracking in the cables. Series of steps involved in visual testing are:

• Firstly, one end of the fiber cable is needed to be connected with fault locater tool.
• After attaching one end of the cable with the fiber optic tracer tool view the other end to note the light being transmitted through the fiber core. If there is no light emitted then you need to recheck the cable connection.
• Subsequently, attaching both the cables ends, one to the visual tracer transmitter and other with the receiver, then use high powered visual tracer to find the faulty areas in the fiber cable. Thus a red light emitting from the tool would help you spectacle the breaks in fibers.

Optical loss testing-Once it has been tested that where the areas of fault are, then comes the second step of identifying optical loss testing. The term optical loss testing describes the difference of the amount of light being passed from one end of the cable and the amount of light being released from the other end of the cable. Following are series of steps under it:

• First of all connect the tests cables to the reference cables.
• After doing so, connect the end of the testing cable to the test source.
• Then power meter is needed to be attached with the receiving end of the reference cable.
• Later, with the help of test source send light signal to the tests cable
• Lastly, at the receiving end of the reference cable note down the reading with the help of power meter that would let you know what amount of light is being emitted from the cables.

Network testing- In a network areas, light travelling through cables can handle gentle curves but if there are kinks in cable then the light would not be able to travel further to the receiver end. Thus in order to know where the problem is in the cable, optical time domain reflector (OTDR) equipment is being used for fiber optic testing. It shoots the light in the cable and then note down from, which point does the light reverts back. Thus OTDR gets the signal from the point where the light was backscattered.

Moreover,Contact-Us for the diffrent network area for the fiber cable networks and more.

Some commonly used products for cleaning fiber optics

Though the idea of fiber optics may sound quite contemporary and belonging to 21st century, but a fact that many people are not aware of is that this super-fast telecommunication technology has its roots way back in the year 1790. The concept is quite primitive and old.

The basic principles of this miraculously fast technology was experimented back then by Claude Chappe when he first experimented with optical fiber in a telegraphic concept but failed. It was later in the year 1840, that two scientists namely Jacques Babinet and Daniel Colladon first explained its principle, through an experiment that involved protecting light from reflection. Since then, fiber technology has bloomed at a lightning fast speed that now serves as the backbone of telecom industry.

In addition to providing fast data transmission, numerous industries are making excellent use of optical fibers such as internal medical examination, dentistry and countless others. However, to keep this technology running smoothing without any interruptions, it is very essential to keep fiber optic connectors clean.

The reason behind cleaning optics is that data flows in the form of light signals which cannot be transmitted if fiber cables are not clean. Even the slightest of dirt, dust particles or stain can cause huge signal distraction. To ensure clean fibers, fiber optic cleaning products should be used. Although, there are various equipment in the market for fiber optic cleaning purpose, but some of the most popular methods has been discussed below. Take a look:

• Compressed gas – This technique of cleaning fiber optic connectors is quite similar to a canned air. It blows out dust and rubbish from the end of connector. But there is one drawback of this technique. The drawback is that it fails to remove dust particles which are less than 3 microns in size.
• Air free solvents and wipes – The main purpose of this method is to remove the dirt particles off the fiber connector by using a special cloth, solvent or lens paper. The most commonly used solvent is IPA that dries off the cables without hampering the signal. The major limitation of this technique is that its success of usage depends on the skills and expertise of technician performing the cleaning.
• Swabs: It is a specially designed instrument for cleaning fiber optic and is used very commonly. Although this is also a good technique to clean fiber connectors, but this one also has certain limits of usage.

Ferrule cleaner (AFC 3000) is the most advanced instrument used till now used by professionals. When it comes to cleaning delicate stuff like fiber optics, it is best suggested to take help of professional fiber optic testing and cleaning company.

Detail of fiber optic cleaning methods and the products used!

Fiber optic cables are a backbone of most of the industries like telecommunication, medical, networking and many more. Thus with regular interval of time these are needed to be cleaned in order to have proper functioning. This is because dust particles, skin oil and hair particles do get accumulate, which halts the working of cable.

So, in order to remove dust from fiber optic cables there is need for cleaning products However, most of the people would think of using a wet cloth to do the same. But this is not a good option because instead of cleaning the cable it would destroy the wires of cable.

Now let’s have a look at 2 methods of cleaning and type of products, which are being used to clean the fiber cables. Each method comprise of various products under it, which has its own purpose to solve. Methods of cleaning:

• Wet cleaning: Use of solvent
• Dry cleaning: No use of solvent

On the basis of categorization of cleaning methods, products used for cleaning are also different in both the methods.
Wet cleaning products:

• Alcohol with lint free wipes: Till today this is the first and foremost way of cleaning. In other words it is also has been regarded as a traditional way of cleaning. A few drops of solvent called alcohol are being put over wipes, which is then further used to clean the cable. Once the wet cleaning is done, dry cleaning step (use of air duster or dry lint free wipes) is followed in order to prevent the solvent residue in the cable.
• Soaked wipes: Second method to clean cables is via the use of soaked wipes, which are durable and non-linting (layer of cotton pad that is non- adherent non-woven fabric). It is the best method to clean the glass fiber or connectors end faces.

Dry cleaning: Usually this process is considered after the wet cleaning procedure in order to dry the solvent being used over fiber cable.

• Air spray: It is dry up solvent, which is used after wet cleaning process. Loose particles that are accumulated over the fiber optic cable and connector they can easily be removed with the air spray.
• Lint free wipes: These wipes are the best medium to clean the end face of the fiber optic cable connector.
• Cletop stick: These are used to clean adapters, receptacles and connector matting sleeves. The cletop stick is inserted into adapters or receptacles, when the tip comes in contact with connector enface it is given a single turn and then pulled out and disposed (because a single stick can only be used once for cleaning fiber optic).
• In-situ cleaning: This is ideal for cleaning transceiver ports. The push button is pressed and ferrule end face cleaner cleans the connectors.
• Reel connector cleaner: This is the most quickest and reliable way of dry cleaning process. It comprises of 2 things that are used for cleaning- polyester cloth and reel cleaner tape.
•  
Furthermore info about the cleaning products just subscribe to our GOOGLE+

Select a good fiber optic maintenance provider and remain tension-free!

Fiber optics is one of the most innovative discoveries of mankind and they are widely used across the telecommunication, electronic and medical industries besides others. This means that a lot of work depends on them and if they err, it can lead to problems for these industries. Imagine the slightest delay in the transmission of a highly important data on the internet? It might tend to make a life altering change, if the information was classified and meant for defense purposes in a country!

This is an extreme example of the result of fiber optics failure. However on a notch lower, there can be the loss of data, time and money if fiber optics doesn’t function in the most efficient manner. So this means that there is dire need for maintaining the ‘health and wellness’ of these optic cables and wires.

When looking for a service provider for the maintenance and support of the optics, you need to make sure that they use the best fiber optic testing equipment so that your products are not only clean and function to the fullest of their capabilities, but also look as good as new for a long time.

While you can opt for preliminary cleaning measures such as the use of air sprays, lint-free wipes and swabs for cleaning fiber optic machinery on your own, it is always advisable to seek expert help when in doubt. Here are chances that you strike the wrong chords and do irreparable damages to the fiber optics if you are not careful. This is why trusting the best service providers in the industry, is a much sensible option!

While selecting a company to deal with your optic cables, make sure that you research and check their background well. They need to be certified service providers with a clean record. You wouldn’t want to trust someone who has a past criminal or forgery record. It would only mean risking your products as well as a lot of money. Counterfeits are common in this industry, and this is what makes it essential for you to make sure that the service provider you choose is the best option money could fetch you.

In the end, it is essential to ensure that the firm you choose is adept in providing on time support for fiber optic testing, so that you can trust them even at the oddest of hours. Going through various industry-options, you are bound to find a worthy one according to your needs. If you want the good products detail in fiber optics then just subscribe to our GOOGLE+

Research all it takes to find the best testing options for fiber optics

With the multitude of changes in the electronic industry, there has been the introduction of fiber optics. These optic cables and wires have been widely used in various sectors of the industry. One of the reasons for the same is because it has brought a lot of speed and clarity to the work being done.

Fiber optics is delicate and fragile, and hence the need for taking the best care of them is essential. Selecting a firm that provides services for maintenance and back up support is crucial, because that is the only way you can ensure that their quality and functionality stays intact for years to come, and they can be used in the most productive manner.

Selecting a firm or service provider for fiber optic testing is a rather tedious task when you are squirmed with options. Not that you won’t find a host of options, the trick here is to select one amongst the multitude and make sure that it’s above the lot and serves your requirements in the most effective way.

Rummaging through options you will find yourself confused while making the choice. Various service providers shall claim that they are best in line and can be trusted for state-of-art services. However, trusting one of them is not easy considering the sort of fraudulence and counterfeiting that prevails in the markets.
This is what makes it essential for you to stick to the basic and go by principles when deciding what service provider to entrust the cares of your fiber optics. Checking that the service provider has the right sort of fiber optic testing equipment which can be trusted for unparalleled testing and cleaning, is essential. This way you may be sure that at least you’re expensive and delicate fiber cables are not going to be dealt with care and exactitude. It is important to understand that no matter how good the counterfeits might sell themselves, in the end, it all boils down to quality testing and cleaning services, which is tough to achieve for them.

There are service providers who might be good at their work but will charge you insane amounts for it. Hence you need to determine how much you are ready to spend beforehand so that you don’t have to get disappointed or unpleasantly surprised later. A little bit of market research is actually all it takes for you to stumble on the most streamlined service providers, who will provide you true value for your money. Fiber optic is essential and if wanna more info in details just subscribe to our GOOGLE+

Simple ways of dealing with fiber optic cleaning

Every sort of machine or components requires proper maintenance. This is something so important that you cannot overlook it need to find ways to clean the parts of the machines as and when required. Fiber optics are really delicate and require the utmost care and precision, so that you don’t break them while you are trying to clean them.
Given below are some commonly used techniques for cleaning fiber optics

1. In order to keep their small particles intact, one needs to progress towards maintaining them in the most careful manner. Lint free wipes are used very commonly for the same. The reason for it is because this type of cleaning is absolutely free of any residue and one can rest assured about keeping them safe.
2. There are such small tricky places like connectors and splices where the wipes don’t seem to fit at times. This is where you can make use of swabs made of cotton. These swabs are definitely going to be much more adept in getting to those nooks and corners of your machinery, which are otherwise hard to approach.
3. When you look for an absolutely hassle-free way of cleaning fiber optic equipment, you can never forget air sprays. These are probably one of the best investments in cleaning aid and tend to be the most effective one as far as loose dust particles are concerned. However there is a slight risk of damaging the delicate fiber optics involved and hence there is need for using these sprays with all the more care and precision.
4. Choosing such a fiber optic provider who is adept in its cleaning and maintenance is another wise step that you may decide to take for the most streamlined results in this area.
5. Hiring an effective service provider for fiber optic testing is a good idea, because they have the correct know-how as well as equipment to deal with the fiber optics well.

It’s essential that you trust a service provider only after checking their credentials for authenticity, so that you don’t have to face problems due to the same. You need to make sure that that you select the most renowned and efficient team of service providers, so that your fiber optics can remain fully functional even after years of use and wear and tear. With research you can find the most suitable options for your requirements.
Fiber optic has an effective service and also wanna more details of products so just go through my GOOGLE+

Fiber optic tool kits – there’s one for every purpose

Fiber optics has been one of the most revolutionary products of the modern era. From the equipment that we use for working to high-end communication, fiber optic technology has completely transformed our life. However, these technical tools demand great amount of care and need to be monitored on a regular basis to ensure they are functioning properly. For the purpose of cleaning fiber optic equipment, you can find various tools available in the market. Here is a look at some of the most common gears available in the market –

 1.Testing kits – this is one of the fundamental equipment employed for the purpose of optical loss testing, insertion loss testing and visual fault location. These contain power meters, fault locators and light source to perform the task of optic testing. In the advanced versions of testing tool bags you can have an option to select for various cutting and stripping tools as well, just to make the task a little easier. You can add patch cables and adapters for testing various types of optical connectors that you are using, depending upon your requirements.

2. Connector tool kits – the traditional forms of this type of tool bag available in the market are also popularly referred to as ‘universal connectorization epoxy tool kits’. Such gears are necessary for hand-polishing termination of various types of epoxy connectors. Some of the most important tools in this package are jacket strippers to remove the outer jacket of the fiber optical cable, connector crimp tools, epoxy for getting the fiber fixed within the connector, inspection microscopes, rubber polish pads, lapping films and hand polish pucks for different type of connectors.

3.Optical cleaning tool kits – these have been by far the most useful fiber optic cleaning products to have ever entered into the market. The fact that improper inspection of fiber cable could lead to heavy data loss, these cleaning equipment have become so important. Some of the most important components of these cleaning kits include foam swabs for cleaning various types of connectors, lint free Kimwipes, reel cleaners for optical connectors, pre-soaped alcohol wipes as well as isopropyl alcohols. There is the option of automated tool kits as well that function with minimum human intervention. So, you can make a choice as per your requirement.

Fusion splicing and termination connector kits are some of the other products available in the market that are associated with fiber optical devices. Depending upon what your requirement is, you can make a choice and purchase any of the above mentioned gears.

Fiberqa is the fundamental part in any fiber optic communication network equipment and has so many good products. For more info about the equipments so just subscribe to our GOOGLE+

Common tools employed for fiber optic testing!

If you have a look at things around you then you will see that fiber optic technology surrounds us everywhere. From electronic equipment to our modern day fast-end communication tools, everything uses these amazing optical fibres.
One of the most important aspects is testing which is related to fiber optic testing devices. To make sure that these tools are running steadfastly, you need to perform regular check-ups and inspections. There are various tools available in the market that you can purchase to complete an inspection kit for the task, or you can even buy these modern day automated kits (which are a much costlier option).

Below mentioned are some of the most common tools that can help in the task of inspection of optical fibres –

1. Microscope – the high power optical magnifier or the fiber optic microscope is one of the most important tools for the task. The purpose of this device is to generate a lead that allows you to inspect whether the cable is in place or not. The device is also helpful in detection of any cracks, breakages, or leakage in the cable, which can be the biggest source of data loss in the communication.
2. Optical Power Measuring Device – this tool plays a role in measuring the efficiency of signal conducted through the fiber. The tool works by throwing light of high intensity through the entire length of the cable and then measuring the level of luminescence from the testing point to the end point of the cable and vice versa, thus providing a good indication about the strength of signal passing through the cable.
3. Digital Continuity Source – This one device will complete the fiber optic testing equipment in your tool kit. The device comprises of integrated network of cables and is highly useful in measuring the signal efficiency. Apart from signal efficiency, the tool plays a role in measuring resistance within the cable, which again provides you the measure of how efficiently the device is working. Therefore, these tools become an essential part of the inspection kits used for this task.

Apart from these major tools, some other common tools that are a must to have in fiber optic tool kits are patch jumpers, wipes, handheld optical testing devices, to name a few. And, if you are ready to spend good amount of money for the same, then there are automated tool kits available in the market as well. So, the choice is entirely up to you.

FiberQA is focused in developing Fiber Optic cleaning and inspection products to ensure accurate testing of fiber optic components.If you want to know more details just subscribe to our GOOGLE+

Understanding fiber optics and optical fiber testing equipment!

Optical fiber is one of the newest members of the IT revolution and is still a stream of constantly changing and evolving technology. In the real world, the applications of optical fiber are endless. Whether it is military, medical sciences, telecommunication or aviation field, the list goes on and on. In contemporary times, where information is almost everything, and it has blended so well with our day to day lives, there is an ever increasing requirement of secure bandwidth to transmit information. Traditional copper wires were not able to keep up with the increased data transfer rates and its vulnerability to keep the data secured, so it gave way to optical fibers.

Let us begin with knowing what an optical fiber is? In short it is a transparent and flexible tube made of glass or plastic, which may be slightly thicker than a human hair. It is used to transmit signals in the form of light, which is faster and consumes way less energy than required by copper wires. The numerous advantages it carries include almost unlimited bandwidth of the cable, low cost per unit length of cable, highly secure channels, no effect of external disturbance of any kind including crossover and EMF, high speed connectivity, etc. Today optical fiber has become the most critical backbone for any country as all the high speed networks consist of optical fibers.

When it comes to maintaining this critical high speed network of cables in their utmost conditions, it is necessary to do periodic fiber optic testing. There are primarily two reasons for the loss of efficiency of a fiber. First is the possible contamination of the cable due to dust particles or oils which might obstruct the proper transmission of signals. The second could be due to pits or cracks developed in the cable which lead to loss of signal. The latter usually happens due to extensive stress or extreme changes in temperature. To prevent disruption of communication, periodic testing is done which includes mechanical and environmental tests. Mechanical tests may include crush resistance, tensile strength and impact resistance while environmental tests may evaluate performance under repeated temperature changes, humidity, etc.

In order to make things easier and to save time there are highly sophisticated testing equipment available in the market at your disposal. Fiber optic testing equipment is used to check and ensure the optical fiber's quality. For example Autocollimator is a device used for measuring angles of light in the cable.

Interferometer is a precision device that is widely used to interfere waves. There are several other useful types of equipment readily available for maintaining and troubleshooting these cables. Also if you wanna more about the details for fiber equipments so just subscribe to our GOOGLE+

Fiber optic cleaning is a tough task!

Judging by the way things are going these days, very soon, shall come such a time when everything shall be dependent on gadgets. These gadgets are largely dependent on cables and wires, and the maintenance of these wires is indispensable. A minor breakdown might tend to cause lost time and consequently lost money. This is what makes it essential for you to make sure that the cable systems are in proper working order so that the streamlined flow of work doesn't get hampered.

This calls for the need for picking out such perfect service providers for fiber optic testing and cleaning that you can rest assured that not even a single nook and corner of your machinery is left untouched and that all of it is safe from harm from moisture, wear and tear, and dust and dirt.

Choosing a service provider might tend to be tedious task and there are all the chances that you get confused while making a good choice. Thus you need to make sure that the choice you make in this regard is the most appropriate one according to the set of options you have.

First of all, make sure that the service provider you handpick for your needs is well versed in the field and has been in business since a long time. This way you shall be able to make sure that your fiber optics are going to be in safe hands and you won't have to worry about the authenticity of services.

The next essential point is to make sure that the service provider you choose for your needs is adept in providing tailor-made solutions according to your specific requirements. This shall be beneficial and you won't have to look for new maintenance provider each time you need aid.

Price constraints might tend to hamper your requirements at times and this is why you need to search for more than one option and finally decide onto the one best suited according to the budget you have in mind for the fiber optics. A professional team shall have the required fiber optic testing equipment which shall make it possible for you to trust only the soundest teams which can check the fiber optic cables in the best way.

All you need to do is make sure that you choose the right options so that you can rest assured that the services that you choose is the most appropriate in the industry.

In fiberqa you can find out the best industrial equipments so just subscribe to our GOOGLE+

Perfect plan of action for fiber optic maintenance

With the wide uses of fiber optics, it is essential to determine that they are in excellent working order even after a long time. This can be done only when the maintenance of the optic cables is focused upon, so that even after years of use, they can be trusted for efficiency.

Fiber optic testing needs to be done with care and precision so as to make sure that they are well maintained and managed, in order to make sure that they remain in good working order for years in the future. Given below are a couple of points that can help you in cleaning your fiber optics.

The use of lint-free wipes- This is probably one of the best methods to effectively clean the intricate parts of the fiber optic cables. The reason for its wide use is that they can effectively clean the surrounding, without leaving a trace of the cleaner. This way the cleaning is residual free and you don't need to worry about the surface of the optic cables messy after they have been wiped. It's because these wipes contain isopropyl alcohol and are most potent in cleaning the fiber optics in the best possible manner.

Cotton swabs-These are another great way method for cleaning fiber optic cables in a great way. It's because these can reach those intricate places, where the wipes might not reach, and can effectively wipe clean the bulkhead adapters and mating sleeves that are fragile parts and need to be cleaned with great care and precaution.

Air Sprays- One of the best methods to clean the unapproachable parts of the fiber optics is with the help of air sprays. It's because they blow controlled amount of air in the right direction, making it possible for you to effectively clean any loose dust particles.

Besides these when you need of fiber optic testing equipment which clean and check cables for the correct flow of current, there is need to rely on experts. These experts have skill and knowledge about how to handle the delicate parts of the fiber optics.

Trust only those fiber-optic cleaning service providers that have good experience in the field, because this way you shall rest assured that no sort of harm in being done to the parts of fiber optic systems and they stay usable for years to come. With proper research you can find such a service provider that supplies the best services and that too at fairly affordable prices.

if you want latest information about fiber optic products so just subscribe to our GOOGLE+

Why is it essential to choose reliable fiber optic testing gear?

Even though with changing times, machines are made to be more reliable and resistant to wear and tear, there is need for proper maintenance to be done for the same. You cannot ignore the fact that with ‘fiber optics’ comes the responsibility of cleaning them and keeping them in the best possible condition, so that they don't spoil away easily.
However, with the multitude of options available in the market, it becomes excessively difficult for you to make the right choice for fiber optic testing equipment according to your various requirement specifications. You need to keep in mind few basic points before you make this choice, so that you don't end up trusting such service providers that don't fulfill your requirements to perfection and you end up wasting money. Given below are few of the same:

1. The reliability of the equipment is the most essential point. There is no denying the fact that the quality of the products or services that you acquire from the service providers needs to be up to the mark so that you don't face any problems with the maintenance and cleaning of the fiber optic cables. There are small and fragile parts of these cables that need to be cleaned with precision and it is essential for you to make the right choice so that you get true value for the money you spend.
2. The next essential step to determine whether the products and services being offered are certified and meet the needs of the industry. This shall ensure that every part of the fiber optic tool kits are genuine and will stay in perfect working condition for years to come.
3. The price factor needs to be kept in mind so that you don't end up spending such huge sums that are unaffordable for your requirements. This shall make it possible for you to meet your budget constraints on time so that you don't waste a single penny on something useless.
4. Researching well for different options in the market for fiber optic testing kits is a good thing, because this is a way in which you can meet your needs and requirements in the best possible manner. You shall be able to determine. The most perfectly suited solution according to your specifications and all you need to do for it is search well. It shall mean value for money as well as adherence with the industry guidelines.

To know more about author and latest products of fiber equipments so just subscribe to our GOOGLE+

Planning to buy fiber optic tool kits, do consider these options

If we have a look at some of the technological developments in the past years, then fiber optic technology emerges as a revolutionary technology. It has brought a change in the ways of communication, and has made it possible to communicate over long distance without any problem. Not only high-end communication, but also it has made it possible to transfer huge amount of data over the internet as well.
Amidst all this, one factor that you need to be sure of is the fact that cleaning and inspection. For the task of fiber optic testing and cleaning, there are a number of options. Let us have a look at what are those –

1. Optical cleaning tool kit – this is the simplest of all options available. It generally includes cleaning supplies and not the usual testing tools. Some of the components of this kit are optic grade canned air, foam swabs of 1.25mm and 2.5mm (used for cleaning of connectors, mating sleeves and adapters), alcohol wipes (pre-soaked generally), isopropyl alcohols, lint free Kimwipes, reel cleaners for FC, SC,LC, MTRJ and ST.
2. Testing tool kit – If we have a look at the optic tool kits used for the purpose of inspection, then there is an option of manual as well as automated kits. Common inclusions of such kits are
3. • Loss testers
   • Visual fault locators
   • Optical return loss testers
   • Power meters
   • Stripper jackets
   • Fiber strippers
   Unlike the cleaning kits, these make sure that the fiber optic equipment is working efficiently and there is no data loss.
   
4. Epoxy and Polish Connector Termination Tool Kit – these are considered as a traditional option for fiber optic inspection. These get the name because of their use in cleaning of epoxy optic connectors such as FC, SC, LC, and ST, to name a few. Apart from this, some other components of the kit are jacket and fiber stripper, Kevlar scissors, crimp and scribe tools, glass polish plates, rubber polish pads, inspection microscopes, heat cure ovens and other miscellaneous tools. So, you can have a look at the list of options that you can find in the market.

Apart from these three fiber optic tool kits, various options like fusion splicing tool kits, quick termination connector tool kits and some others are available in the market from which you can choose. However, before you actually make a choice, be sure that you know what your needs are? Whether you want to do cleaning or testing or both, you can make a choice as per your requirements.
To know about the latest products and services of fiber optics just subscribe to our GOOGLE+

Fiber optic tool kits commonly available in the market

Fiber optics has emerged as the most important tool for high end communication. The fact that you can transfer huge amount of data through these optical cables and that too at far distant places, makes it one of the most important breakthroughs technology has brought forward for people.
The most important thing that you need to keep in your mind is that these optical cables need proper maintenance and a slight fault in these could lead to huge amount of data loss. To make the task of maintenance and testing easy, a wide range of testing kits are available in the market. Let us have look at the most popular ones –

1. Fusion Splicing tool kit – fusion splicing is quite an intricate task and requires complex tools. This is what makes such fiber optic tool kits so expensive. The most important part of these kits is high precision fiber cleavers, the costliest part of the whole gear. Apart from these cleavers, these kits also contain jacket strippers (to remove the outer jacket from the cables), fusion splice protection sleeves, stripper (to get rid of the fiber coating), disposal units and other miscellaneous items such as wipes and alcohol, to name a few.
2. Optic Cleaning Tool kit – these are the simplest ones and do not contain any technical tools. These focus more on the cleaning aspect more than the maintenance. Some of the common components that are a part of such cleaning kits are canned air, lint free Kim wipes, alcohol wipes, foam swabs (2.5mm for FC,ST,SC connectors and 1.25mm for LC and MU connectors) and fiber connector reel cleaners, to name some.
3. Quick Termination Connector tool kit – the fact that each connector is designed separately as the manufacturers need; you cannot find any universal connector tool kit. However, common brands that manufacture fiber optic connector testing kits include 3M Hot Melt Connectors, Corning Unicam Connectors, Tyco/AMP Light Crimp plus connectors, all having variable testing tools in them.

Apart from these, there are fiber optic testing tool kits and traditional epoxy and polish connector termination tool kit as well, used for the task of maintenance and testing of fiber optic connections. Looking at the importance of cleaning in maintaining a good connection and efficient data transfer it becomes critical to have a tool kit by your side, if you are using fiber optic technology for domestic as well as commercial purposes. This article gives you a good idea about all the latest kits available in the market.
If you want to know about author then just have a look at https://plus.google.com/u/0/112981337829189413685

Choosing the most appropriate fiber equipment is essential, here's why!

There is no denying the fact that with the advancement of science and technology there has been the introduction of novel forms of optic fibers that are totally safe and reliable for the use in various complicated applications.

However you cannot undermine the fact that machines can never replace man, and that they can falter and break down at any given point of time. Won't it be so much better if we were prepared for these failures beforehand?

Fiber optics are extremely delicate products and are used in cable and wiring applications. There is however, always a chance that they will give up at time and you will be left stranded without aid. This is why it is essential to keep checking the optics for their functioning so that you don't face such technical problems.

Given below are a few requisites that you need to keep in mind while choosing a service provider for maintenance:

Firstly and essentially, it’s important to make sure that the service provider you choose for fiber optic inspection is well versed in his job and can deal with the intricate mess of wires, and check them well. They need to have the know-how and technical expertise for dealing with the smallest to the largest problems that may occur in this fiber optics.

The next essential thing to look for is the fact that the person is not charging you ridiculously high amounts for the services they provide. This is important so that you don't end up overspending for a purpose was you could have got solved for much less than what you are investing. For the same you need to search various options so that you can find the most affordable one.

Lastly and importantly you need to make sure that the service provider you choose can be trusted for the best fiber optic testing equipment so that you don't face any issues like further damage in your products. With this it is also essential for you to make sure that the firm you choose for the same can be trusted for a longer period. It's because it tends to become extremely difficult for you to keep changing your maintenance people and find newer ones.

When you keep these basic requisites in mind, there is no way you can ever falter while choosing a service provider, and hence shall receive the best services available in the vicinity. Put in some extra research for the best results.
Find out more about author at https://plus.google.com/u/0/112981337829189413685

Fiber optics need to be tested for errors!

Fiber optics has been used for a wide range of purposes since a long time and there is no denying the fact that they have a versatile gyre of applications. This is what makes them the best choice for many electronic needs. However it is essential that the fiber optics are properly cleaned and checked for their proper functioning at regular intervals so that the users don't face any sort of problems.
For this purpose of cleaning and inspections it is essential to have the right Fiber optic testing equipment, so that even the slightest problem is not overlooked. Depending upon the right people for this testing ins essential because they are the experts who can actually conduct a thorough check up for the fiber optics, making it possible to take effective steps for correction where needed. Make sure that these basic steps for cleaning and testing are followed for the best results:

1. There is need for removing the dust and grime off the surface and the best way to do so is to using simple tools such as air sprays, swabs and alcohol wipes. This shall not only helps in cleaning the surface and making it free of germs and residue but shall also help you in rendering a smooth surface so that the rest of the inspection can easily be done.
2. The next step is to use the top-notch Fiber optic inspection gear; so that even the slightest issues with the passage of light can be discovered and rectified before it leads to a huge technical failure. After this is done you shall need to make sure that all things are in proper working order and the wear and tear and friction has not totally hampered the perfection of the optic fibers.
3. Make sure that if you are hiring a professional for help, they are well-trained and equipped to solve the glitches that might occur, and also has the complete know-how of the trade, so that there is no additional damage done to any of the delicate fibers while the maintenance is done
4. Compare prices from different service providers so that you can crack the best deals with affordable service providers. Trust the most feasible option for your needs so that you don't have to keep changing the fiber optics now and then. All you need to do is search in the right places for the best results.

Find out more about author at https://plus.google.com/u/0/112981337829189413685

How can you use simple tools for the perfect fiber optic scrutiny?

Fiber optic tools are delicate and vulnerable to damage. This is what makes it really important for proper maintenance and after care for the same, so that they stay in the best functioning condition for a long time
.
Though the common techniques of fiber optic inspectionare well-known and almost too obvious to discuss, they are usually the best way to care for the delicate and intricate machinery. Hence I shall like to throw light on some of the time-tested methods of optic maintenance.  

Bring in the home tool box handy!
 
Simple and basic methods of cleaning intricate fibers is one of the best way to clean the dirt and grime that deposits over them due to passage of time and regular usage. Cotton swabs, lint free alcohol wipes and tooth-brushes that have soft bristles can be used to effectively clean the surface and remove the deposits of dust. The best part is that this simple home use kit won't cost you much and shall help you clean the fiber optics without leaving a trace of residue behind them

The fiber optic microscope
 
One of the most excellent inventions of all times is the fiber optic microscope. It is one such gadget that helps you look into the nooks and corners of the machinery in a way that could never have been possible with the naked eye. This is the most useful gadget when it comes to fiber optic inspection and should definitely be considered for use, because it can easily help to locate the damages and need for repair, without having to stress much or wasting much time.

The optical power measurement wizard!
 
Power measurement is a really important part of fiber optic inspection and this needs to be kept handy to easily locate whether the fiber optics exhibit the same luminescence and are functioning ideally according to the needs and requirements. This device works by throwing high intensity light across the optic cables and seeing whether they reciprocate the action. This way you shall be able to find out whether the flow of current is perfect between the fiber optics
. All you need to do is research to find some of the most authentic and useful fiber optic testing equipment that you can use for years to come. It shall help you in locating the chips and breaks and any other types of problems that might tend to occur in fiber optics and the same can be rectified before they turn into huger problems
. Find more about fiber optic testing equipment at www.fiberqa.com

Some simple steps that shall help in keeping fiber optic cables in the best shape

Fiber optic cables and connectors are intricate and delicate and when they are used for a while, they need to be checked well for their wear and tear and proper functionality. There is need to make sure that they are well maintained from time to time so that you have well functionality of the fiber cables so that you can rest assured about their quality and usability in the future.

Given below are some ways of fiber optic inspection that can help you maintain them for a long time:

Physical cleaning

The first fundamental step is to clean the fiber cables with the help of lint free wipes, air sprays, cotton swabs and other modes of physical cleaning. They can also be cleaned with the help of alcohol swabs. A great benefit of the same is the fact that it doesn't leave any sort of residue behind it and the optic cables can be cleaned without any hassle. The wear and tear of the machinery needs to be checked so that it doesn't wither away before time and cause problems in your bigger machinery which they are mere parts of.

Electric conduction tests

The next step is to determine whether there are any sorts of electrical flaws in the connectors or splices or other fiber optics. You need proper Fiber optic testing equipment so that even the smallest defects in the machinery can be captured well. You need to be sure that your equipment such as the fiber optic microscope and other electricity conduction detectors are in the proper working order, so that it can check for problems well.

A good way to ensure that our fiber optics are in the best shape is to make sure that when you buy them the service provider gives a warranty for their functioning. Besides this you need to choose such a service provider that can efficiently help you in maintenance of the equipment from time to time so that you don't need to look for a separate service provider to do the same.

It’s essential that you check your fiber optics well at regular intervals so that you don't end up losing machinery and wasting money every now and then. It’s important to entrust the cares of the same to a professional fiber optic inspection professionals if you can't handle it on your own, so that they give the best grade of services.

Find more about Fiber optic inspection at www.fiberqa.co

Fiber optic loss testing equipment – what you need to know about it?

Technology has brought revolution in every aspect of living. The tools and equipment that we use in our day to day activities all have made life easy. Of all these, electronic communication is something that has changed the ways of communiqué amongst people living at distant places.

All this has been possible with the emergence of optical fibres, cables that make use of glass fibres for transmission of signals. This amazing technology has brought high-end electronic communication to the next level by enabling the transfer of huge amount data at exceptional speed. However, one critical aspect of this technology is Fiber optic inspection. This article will shed some light on the basics that you need to know about testing and inspection of these fibres – Tools used –

1. Microscope – this device is used to deliver a lead, which is utilized to know whether the optical fiber is in place or not. Commonly used devices have an inbuilt illumination system that is helpful in detecting any breakage or problem in the circuit that was the cause of loss in the signal
.
2. Digital continuity/tone source – the modern day optical cables can be equipped with these tone sources to get the measure of how efficiently the transfer of signal is taking place. The unit functions in generating a signal internally from one end of the cable to the terminal point, thus measuring the efficiency & signal strength
.
3. Optical Power Measuring Device – it is an instrument used to measure the luminescence level of the unit. It works by throwing high intensity light signals and thereby measuring the efficiency of the signal transferred

These are the most important tools that are a part of Fiber optic testing equipment, apart from some others like optical wipes, connectors, and power meters. Things to be cautious about –
Before you actually begin with the task, you need to keep these basic things about testing –

1. The fact that fiber loss varies with the wavelength, makes it essential to use the testing wavelength similar to that of the working wavelength. Otherwise, there is a huge possibility of incorrect results
.
2. The light wave used for testing should also be same as the intended working light. For e.g. if the system is to be used for LED source, then it must be tested with an LED source and not a multimode source

All this gives you a brie idea about the fiber optic testing and equipment used in the process.

At last we can say that Fiber QA is a well reputed name known to deliver excellent fiber optic testing equipment.

What are fiber optic testing and cleaning? How exactly are they done?

We are all aware of the various uses and applications of fiber optic cables in different industrial sectors. After having installed the cables in their rightful position, the next important step is to check its working from time to time. This needs to be done to find out if there are any faults and fix the shortcomings as and when they occur, without compromising the functionality and safety of these fiber cables
.
Different types of fiber cables and their components require different types of testing equipment. However on a general basis, there is need for a specific Fiber optic testing equipment that can be used for the general testing and cleaning of the fiber optics. These might be as follows:

1. Cleaning aid: Its most essential to clean the fiber optic cables and machinery. This is important because wear and tear and forces of nature might case a lot of dust and grime to accumulate on the surface and the heads of the fiber optics. Its essential to keep them clean from time to time, otherwise there are chances of it hampering the working of the same in the long run. This may include simple things like cotton swabs and lint free wipes, to alcohol, because it's a residual free cleaning agent.
2. Power testing gear: Next comes the basic requirements for testing the flow of power in the optic fibers. This is also important because it reveals to you how well your purpose is being solved with the help of the machinery. For this you are going to require gear like source meters, optic loss test kits and so on. These shall help you determine whether there is the optimum utilization of resources and it can help you in planning a course of action to rectify the errors with the same

How to test fiber optics?

Fiber optic inspection is of vital importance. Visual inspection is the best way to locate errors on a preliminary level. It helps you determine whether the cables, connectors, splices and so on are in their required position so that you can check them for further damages and repair them as per needs.

Checking optic power of the various parts of the fiber optics is also an essential step. This is important to determine whether all components function according to their requirements. Cleaning the parts of fiber optics with swabs and cotton buds and wipes will give you room to have a better look at them and this way you shall be able to locate if there are errors and damages in it, which need to be corrected

Contact Us for more about various types of fiber optic inspection modes at fiberqa