Fiber optic tools simplify the task of inspection of optical cables

The term “High-end Communication” is a popular word these days, and the practicality of communication through the use of fiber optic cable have grown for lot of people, either for personal or business use. These are a bunch of transparent cables that are made of either glass (silica) or plastic and are used to transmit signals in faster speed over a long distance.

Because of the use of glass, these cables have an advantage of being light weight. However, due to their frangible nature, these often get cracked, broken or damaged. And in such case, technicians have to perform the inspection where end-to-end continuity is checked in order to ensure that the flow of communication is not hampered. The technician will perform some basic application in the process of fiber optic inspection, which has been illustrated below:

• Identification: First of all a technician would inspect the cable, and relative power inspection is being done in such case. There are several methods which can be performed to isolate the desired cable from the group of cables without breaking down the link
.
• High loss point: Identification of high loss point sues to break-down, crack, tight bend is being inspected by the fiber optic identifier. In this case, relative power point from end to end can be inspected, that is due to sudden increase or decrease in relative power, that proves high loss of point exists between two points
.
• Verify connectors: An identifier is also used to inspect the connectors and slices. This is possible by attaching the identifier on one side of the connector/slice and note down the reading of relative power. Likewise repeat the measurement process on the second hand side of the connector/slice. Thus difference between the both the reading should be equal to the optical attenuation of the optical connector/slice. And if not so, then the connector/slice may be defective

Thus, all the above mentioned factors used in the process of inspection cannot just be done by technician hands; rather they would require fiber optic testing equipment to inspect the defaults in the cables. Further listed below are some of the tools used by the technician:

1. Fiber optic microscope: This tool is use to examine the cable and discover the chips, breaks and malformations which causes loss of signal, bad speed etc
.
2. Continuity tester: This is used to detect the digital continuity and determining the signal efficiency
.
3. Optical power meter: This device is used to measure the power in an optical signal

Moreover we can say that Fiber QA is a company that is renowned for making commercial fiber optic testing equipment.

What Will Happen If Fiber Cables Are Not Cleaned?

The purpose of fiber cable cleaning and inspection is to provide error free communication between fiber optic equipment and quality connections. the transmissions need more attention to the timely cleaning and inspection of fiber connector surfaces.

It is an important task to perform fiber optic testing and cleaning before coupling. This document describes the basic inspection and cleaning techniques for optical fiber connectors.  

Why testing and cleaning are critical?
Any dirt or contamination in optical fiber connection can interrupt the communication and can cause failure of whole network. Here is the advice “don’t take little things for granted, when appear they can make blunder”. Similarly, even single 1 micrometer dust particle can be a major cause of big signal loss and can affect the quality of the signal.

The minute dirt particles trapped between two fiber ends can scratch fiber glass surface. In addition to dust particles, other types of contamination such as oil from human hands, hair, powdery layers etc. attached on the end face of the fiber cable must be cleaned.

If not removed timely, such deposits can cause damage to equipment.

General Reminders and Warnings
 
Review the following reminders and warnings, before your perform fiber optic cleaning and inspection.

• Make sure that you have turned off all laser sources before inspect fiber optic components, fiber connectors, or bulkheads
• Make sure that the fiber cable is disconnected at both faces
.
• It is good to wear safety glasses if required
.
• Never forget to inspect and clean fiber cable prior to mating
.
• Cover the unplugged cable connectors with a protective cap
.
• Use resealable bag or container to keep the unused protective caps so to minimize the possibility of transfer of dust and other contaminations to the fiber cable
.
• Use swabs and tissues in a proper manner
.
• Use connector housing (a plastic shell that is used to hold electrical contacts) to plug or unplug optical fiber 

• Never inspect the fiber when the laser systems are on
.
• Never touch the ends of the fiber connector
.
• Never pull the fiber cable forcefully
.
• Never reuse any cleaning cassette reel or tissue
.
• Don’t try to do perform inspection and cleaning by yourself without any knowledge of the whole procedure because improper cleaning can damage the connector

Contact Us If you are looking the best seller for fiber optic cleaning and testing equipments,

What Does A Fiber Optic Tool Kit Include?

Fiber optic cables are made of small and intricate parts that require the best cleaning and care, so that they remain functional for a long time. For the same, each fiber optic cleaning professional surely has a tool kit that holds the required equipment in tests and cleaning of the connectors, splices, cables and wires, overhauling them and making them fit for use in the future.

Peeping into a professional's bag, you are sure to find the below mentioned:

1.Jumpers or patch cords- This is something you are almost certain to find in a fiber optic tool kit. This is because they are ideal in connecting end devices to the structural cabling system. It's usually a manageable length of fiber cabling that is attached to SC, LC, ST, MTRJ or FC connectors on the ends.

2.Air sprays- There are such places in fiber optic tools that need to be cleaned carefully, because even the slightest change in their position could mean loss of data transmission, or the quality of work flow might be hampered. These can be cleaned with air sprays as it helps in spraying away the loose dust particles that form a coat on the electric setting, and makes it slightly worn out, and unfit for use.

3.You can also certainly find small swabs or sticks, the purpose of which is to clean the small and difficult to reach nooks and corners of the machinery. These are usually made by the professional on the spot, or there is use of readymade cotton buds for cleaning the heads of connectors and other small parts as well.

4.Lint free alcohol wipes-These are ideal for cleaning machinery without harming the small and delicate parts, and making sure that they don't have any sort of moisture or dust residual on them, which may tend to hamper their working. It shall remove ionic soils and any other foreign material on them, without leaving behind a trace. This is what makes them the most widely used and functional ways of cleaning fiber optics.

Besides this there are different types of components required for different needs in fiber optics and similarly, there are different kits made for it. All you need to do is choose the one that best suits the particular requirement and gives the best possible results. Finding good tool kits is no longer an issue with the wide range of products available in the market these days.

Fiber optic test kits are beneficial for various purposes and you can easily find them as per your needs and requirements. Find more at www.fiberqa.com

What Does A Fiber Optic Tool Kit Include?

Fiber optic cables are made of small and intricate parts that require the best cleaning and care, so that they remain functional for a long time. For the same, each fiber optic cleaning professional surely has a tool kit that holds the required equipment in tests and cleaning of the connectors, splices, cables and wires, overhauling them and making them fit for use in the future.

Peeping into a professional's bag, you are sure to find the below mentioned:

 1.Jumpers or patch cords- This is something you are almost certain to find in a fiber optic tool kit. This is because they are ideal in connecting end devices to the structural cabling system. It's usually a manageable length of fiber cabling that is attached to SC, LC, ST, MTRJ or FC connectors on the ends.

 2.Air sprays- There are such places in fiber optic tools that need to be cleaned carefully, because even the slightest change in their position could mean loss of data transmission, or the quality of work flow might be hampered. These can be cleaned with air sprays as it helps in spraying away the loose dust particles that form a coat on the electric setting, and makes it slightly worn out, and unfit for use.

3.You can also certainly find small swabs or sticks, the purpose of which is to clean the small and difficult to reach nooks and corners of the machinery. These are usually made by the professional on the spot, or there is use of readymade cotton buds for cleaning the heads of connectors and other small parts as well.

4.Lint free alcohol wipes-These are ideal for cleaning machinery without harming the small and delicate parts, and making sure that they don't have any sort of moisture or dust residual on them, which may tend to hamper their working. It shall remove ionic soils and any other foreign material on them, without leaving behind a trace. This is what makes them the most widely used and functional ways of cleaning fiber optics.

Besides this there are different types of components required for different needs in fiber optics and similarly, there are different kits made for it. All you need to do is choose the one that best suits the particular requirement and gives the best possible results. Finding good tool kits is no longer an issue with the wide range of products available in the market these days.

Fiber optic test kits are beneficial for various purposes and you can easily find them as per your needs and requirements. Find more at www.fiberqa.com